ADT® Authorized Dealer Serving Dayton & Surrounding Areas
close up of a lady adjusting the security panel
March 01, 2022

How To Reset Your Dayton System

An important advantage of having your home security system set up by professionals is that you seldom need to concern yourself with it. Even so, there may be a couple situations where you must reset your alarms in Dayton. When using the ADT Command interface, your system reset normally requires just a few minor tap of a button after a false alarm, power outage, or battery change.

Consult Your Instruction Manual Before Attempting An Alarm Reset

Here’s a simple yet valuable tip before you begin to reset your Dayton home security system, read your manual prior to proceeding. You don't want to compromise your property’s defense due to pressing the wrong button. In addition, the process might change if you moved from a number pad to a fully digital system. Keep in mind that if you’re struggling to reset your system, don't worry as you can always contact your trusted security specialists.

Resetting Your Dayton Home Security System Due To A False Alarm

Typically, a false alarm takes place due to a sensor that was tripped by accident. You are able to engage the ADT Command touchscreen or access your ADT security app and tap the shield option and enter your unique passcode to deactivate the alarms for these instances. You may get a call from your monitoring professionals, but just let them know you experienced a false alarm.

Resetting Your Alarm When Experiencing A Power Outage In Dayton

If power is lost from lighting, strong winds, or other reasons, you could start hearing a beeping sound from your central command hub. This lets you know that your security is using the secondary power source. To reset the alarm and stop the steady beeps, you need to deactivate and reactivate your system.

However, if power is out for a longer period of time, you could need a full system reset. Heed the directives in the instruction manual -- normally by entering your code and pressing the on/off button twice -- and you should be running fine. You could still hear the auxiliary power beeping, as it may not cease until your battery is fully charged. Call your security technician if you keep having issues with your ADT system 20 hours after the power is resumed.

When You Need To Reset Your Home Security System After Changing A Battery

There will be infrequent times when you will have to switch out a battery in one of the devices in your security installation. When this needs to be done, you should change your system to Test Mode so you don't trigger a false alarm. After the you replace the old battery, change the alarm out of test mode and resume normal operations. If the control panel doesn't notice the device or the battery icon stays on, you could need a total reset of the system.

Resetting Your Dayton Security System Following The Addition Or Deletion Of A User

Removing or adding personal codes can be accomplished on your ADT Command hub and the ADT Control mobile app. You won’t have to perform a resetting of your system following the addition or deletion of codes. However, if you relocate to a new property already equipped with an ADT system, you need to call your security specialists at (937) 230-5750 to establish a new plan. The installation tech will come out and upgrade equipment, place more alarms or cameras (as required), and perform a full reset.

A Well-Designed Security System Is The Right Choice

Attempting to reset a home security system in Dayton is a challenge if it isn’t equipped with understandable devices and controls. If the time has come to acquire your functional and powerful home security system, call (937) 230-5750 or submit the form below. Our specialists are pleased to design the ideal security system for your residence.