Categories

System hiccups and false alarms can be frustrating, and even worse, could prevent your security system from working the way it should. Fortunately, most troubles, from false alarms to dead batteries, are simple to fix. Take a look at our suggestions for troubleshooting your home alarm system in Dayton. We’ll help you keep your family members protected and your system running properly.

Test Your Home Security System In Dayton

One sensible way to troubleshoot your property’s defense is to test it! Modern systems permit you to put them in test mode to avoid prompting an emergency call. Once you’re in test mode, take these steps:

• Arm your system as you would when leaving.
• Open a door or window protected by a contact sensor, or try to set off another device. Close the window or door once you’re finished so it doesn’t trip the alarm as you get out of test mode.
• Allow the alarm to resonate for 60 seconds to make sure a transmission is delivered to the security company and an entry is created in the alarm activity log.
• Continue testing equipment as needed
• Check the alarm’s activity log to verify functionality.

Rest assured, monitoring professionals can see that your alarm system is undergoing a test. Just make sure to switch off test mode when you’re done. It’s smart to test monthly or whenever you adjust your home’s phone or internet provider.

Inspect The Positioning And State Of Motion Sensors

Although an essential element of your alarm system, motion detectors are prone to false alarms. You can help prevent them with some basic troubleshooting.

• Do a physical inspection. Are there objects that could move within the sensor’s detection zone, like drapery blown in a breeze?
• Is the sensor dirty? Grime, dirt, and cobwebs can cause issues. Ensure the sensor is clean.
• Does the motion detector offer pet immunity you can activate? Some models can be configured to disregard pets weighing as much as 100 pounds.
• When was the battery changed? A low battery can impact performance or cause false alarms.
• Is the sensor pointing toward a heat source? Excess heat from direct sun or a fireplace can cause an alarm.

Keep Batteries Ready And Pay Attention To Low Battery Signals

One of the great things about new home security systems is that they’ll let you know when batteries are getting low. If your system uses a control panel or mobile app, you’ll usually see alerts there. Depending on your alarm, you may detect an intermittent beep when batteries are getting low. 

Contact sensors, smoke detectors, motion sensors, and other wireless tools have batteries that need to be replaced every year or two. It’s a good idea to keep batteries around and establish a replacement schedule. Top systems also include a rechargeable backup battery for the main control panel. This backup helps keep your system running if you lose power and should charge back up once power is back online. If it doesn’t recharge, you should replace it.

Troubleshooting Is Simple With ADT Home Security In Dayton 

As the leading name in home security, ADT builds systems that provide unsurpassed functionality and protection. Switching to test mode is easy through the ADT+ app or MyADT.com, and you’ll always get alerts when a battery is nearing depletion. Get in touch with Secure24 Alarm Systems, an authorized ADT dealer, to learn more and design a system perfectly suited to your Dayton home. Place a call to (937) 230-5750 or submit our form today!